- Enter your model number to make sure this fits.
- ALL IN ONE DESIGN: Specially Designed Bracket Arm for the training wheels .ALL IN ONE ,very stable and strong
- MATERIAL:Bracket Arm is 3mm metal,very strong and heavy ,The Wheels is ABS Protect Environmental Material
- HARDWARE Included:2 x Bracket Brace Plates,2 x Nuts,2 x Washers,2 x black caps,2 x Vertical Bracket arms,2 x Wheels
- APPLICATION:Fit All Kids’Single Speed Bicycles 12 14 16 18 20 Inch Bike(Cannot Be Installed On Bikes with Derailleurs)
- ★CAUTION: 1.Dont fit some huffy brand bike ,because these bike’s rear axle is very short ,if you want to install the training wheels ,you need buy the extra extension blots . 2.FIT 12 14 16 18 20Inch single speed bike. 3.Install tools:Adjustable Wrench and pliers
ADULT ASSEMBLY ERQUIRED TOOLS REQUIRED :
Socket Wrench，Adjust Wrench and Pliers
ASSEMBLY INSTRUCTION:（AS P3 SHOWES）
1. Use the bracket Arm insert 1# washer and the wheel hole ,and then through the 2# washer
2. lock nut and tighten ,make sure that the wheel can turn it freedom.
3. Cover the black cap ,if the cap cant cover,pls adjust the nuts.
4. Repeat step 1-3 on the second wheel bracket
INSTALLATION INSTRUCTIONS(AS P6 SHOW)
1. Remove nut and any washers (depending on bike model-see bike assembly instructions for details )
2. Attach the provided spacer to the rear axle
3. Place stabilizer bracket onto axle
4. Put the long pad luck on the bracket .
5. Determine desired height of the training wheels to find proper hole to use on the wheel bracket.when attached ,the training wheels should have about 1/4 -3/8inch clearance from the ground .
6. Place the wheel bracket hole that corresponds to desired height onto rear axle.the stabilizer bracket should interlock with wheel bracket fitting firmly together .
7. Attach bike’s original lock nut and tighten
Repeat steps 1-6 on the opposite side of the bike.